CMH Manufacturing

首页产品反向倾转铸机 → CMH Manufacturing Introduces a New RT Machine

CMH Manufacturing Introduces a New RT Machine

CMH Manufacturing Co. introduced a new twist on the reverse tilt process at the CastExpo. Our static cylinder head machine inspired the development of the HALL RT2H. The machine has twin opposing rams and a lower cylinder that can be programmed as a pull or an ejector. The ram cylinders each have 15” stroke and the distance between the platens when both rams are open is 42” and with both rams closed the distance is 12”. The maximum clamping force is 29,000 pounds. The stroke on the pull/eject is 4” with pulling force of 16,200 pounds and pushing force of 18,500 pounds. It is available with standard or proportional tilt.

服务

CATALOG

新闻

ARTICLES

VIDEOS

展览会

 



Hall booth #754

Defect Prevention in
Permanent Mold Casting
Through Process Control.

 

By John Hall

Read more >