Small Ejector Pins - CMH Manufacturing

Stahl centerless ground ejector pins are made from high carbon steel from durability in operation.

Two semi-finished hex nuts and two semi-finished hex jam nuts are furnished with each pin.

For applications that require longer lengths or where rigidity is considered important we suggest the use of Stahl standard stock extensions for ejector pins.

Please refer to the Typical Permanent Mold Assembly sheet and individual catalogue sheets for all your permanent mold component requirements.

Part Number	A	B	C
88893	6 - 32 x 1	4 1/2	0.1285 (No. 30)
98978	10 - 32 x 2 1/2	4	0.191 (No. 11)
98980	10 - 32 x 2 1/2	5	0.191 (No. 11)
98982	10 - 32 x 2	6	0.191 (No. 11)
98988	1/4 - 28 x 2 1/2	4	0.250 (E)
98989	1/4 - 28 x 2 1/2	5	0.250 (E)
98990	1/4 - 28 x 3	6	0.250 (E)
98992	1/4 - 28 x 3	7	0.250 (E)
98994	1/4 - 28 x 3	8	0.250 (E)
91205	1/4 - 28 x 3	9	0.250 (E)
99017	1/4 - 28 x 3	10	0.250 (E)
98998	5/16 - 24 x 2 1/2	4	0.316 (O)
98999	5/16 - 24 x 2 1/2	5	0.316 (O)
99001	5/16 - 24 x 3	6	0.316 (O)
99003	5/16 - 24 x 3	7	0.316 (O)
99005	5/16 - 24 x 3	8	0.316 (O)
99007	5/16 - 24 x 3	9	0.316 (O)
99009	5/16 - 24 x 3	10	0.316 (O)
99010	5/16 - 24 x 3	11	0.316 (O)
99011	5/16 - 24 x 3	12	0.316 (O)
99012	5/16 - 24 x 3	13	0.316 (O)
99013	5/16 - 24 x 3	14	0.316 (O)
99050	3/8 - 24 x 2 1/2	4	0.377 (V)
99051	3/8 - 24 x 2 1/2	5	0.377 (V)
99052	3/8 - 24 x 3	6	0.377 (V)
99053	3/8 - 24 x 3	7	0.377 (V)
99055	3/8 - 24 x 3	8	0.377 (V)
99016	3/8 - 24 x 3	9	0.377 (V)
99058	3/8 - 24 x 3	10	0.377 (V)
99020	3/8 - 24 x 3	12	0.377 (V)