|
HOME → PRODUCTS → TRADITIONAL TILTING MACHINES → 6H Tilt-Pour Permanent Mold Casting Machine
6H Tilt-Pour Permanent Mold Casting Machine
Gravity Die Casting Machine
Features
- Low maintenance due to few moving parts, heavy duty, rugged, and dependable.
- Frame open on 3 sides, plus front and bottom, to facilitate use of core pulls in 5 directions.
- Twin cushioned tilt cylinders provide a smooth tilting motion from start to stop.
- Twin ram cylinders provide a safety factor, as well as extra holding pressure and better clamping balance.
- Hydraulic power units available in manual, automatic, or with programmable controllers, sized to facilitate all available accessories at low operating pressure.
Specifications
Clamping pressure |
60,000 lbs. |
(27,216 kg.) |
Max. mold size |
48 x 62 in. |
(122 x 158 cm) |
Max. mold weight |
8,000 lbs |
(3,629 kg.) |
Ram stroke |
40 in. |
(101.6 cm) |
Daylight opening |
23.5 in |
(59.7 cm) |
Pressure height center |
20 in. |
(51 cm) |
Machine weight |
22,000 lbs |
(9,980 kg.) |
Tie bar size |
2.5 in dia. |
(6.35 cm) |
Tilt speed |
5 sec. |
|
Options
- Tie Bar Extensions
- Manual Swing In Casting Catcher
- Powered Swing Casting Catcher
- Front Ejector
- Proportional Tilt
- Custom Platen Drilling or Sizes
Shown with optional front ejector.
Click to enlarge.
The drawing (above) requires Adobe Acrobat Reader to view.
|
